Nlynx ZWA-G120 Manual do Utilizador Página 1

Wireless LAN Device Series Multi-Mode AP ZWA-G120 User Manual Version. 1.0.0 (13.05.2005)

8 6. Press “Next>>” button then set the IP address of LAN interface. 7. Press “Next>>” button then select the “PPPoE” for “WAN Access

9 9. Press “Next>>” button then select “None” for “Encryption” then press “Finished” button. 10. Wait for refreshing web page. 11. Use “WD

10 12. Enable WDS function and add the BSSID of DEV2 to “Current WDS AP List”. 13. Since we access the device by wireless connection, it may tempo

11

12Configure DEV2: 1. Access the web server (http://192.168.2.254) of device from the Ethernet port. Caution If you configure multiple devices in the

135. Press “Next>>” button then set the IP address of LAN interface. 6. Press “Next>>” button then select the “AP+WDS” for “mode” and

149. Access the web server by new IP address “192.168.2.202” then use “LAN Interface” page to disable DHCP Server. 10. Wait for refreshing web pag

1512. Enable WDS function and add the BSSID of DEV1 to “Current WDS AP List”. 13. Use the “Status” page to check the settings.

16Configure DEV3: 1. Access the web server (http://192.168.2.254) of device from the Ethernet port. Caution If you configure multiple devices in the

175. Use the “Status” page to check the settings.

iTABLE OF CONTENTS PREFACE ...

18Configure DEV4: 1. Access the web server (http://192.168.2.254) of device from the Ethernet port. Caution If you configure multiple devices in the

195. Press “Next>>” button then set the IP address of LAN interface. 6. Press “Next>>” button then select the “DHCP Client” for “WAN A

209. Wait for refreshing web page. 10. Change the IP address of your PC to 192.168.3.x then access the web server by the new IP address “192.168.3

21Configure DEV5: 1. Access the web server (http://192.168.2.254) of device from the Ethernet port. Caution If you configure multiple devices in the

225. Press “Next>>” button then set the IP address of LAN interface. 6. Press “Next>>” button then select the “Client” for “mode” and

239. Access the web server by the new IP address “192.168.2.205” and use “LAN Interface” page to disable DHCP Server. 10. Wait for refreshing webp

2412. If the “State” of “Wireless Configuration” is not “Connected” or you want to refresh the “RSSI “, please use “Site Survey” page to re-connect

25Basic Settings Disable Wireless LAN Interface Disable the wireless interface of device Band: The device supports 2.4GHz(B), 2.4GHz(G) and 2.4GHz

26EthernetAPAP Client #2AP Client #1 z Ad Hoc: This type provides a peer-to-peer communication between wireless stations. All the communication is

275 2432 Americas, EMEA, Japan, Israel, and China 6 2437 Americas, EMEA, Japan, Israel, and China 7 2442 Americas, EMEA, Japan, Israel, and Chi

1 Preface This guide is for the networking professional who installs and manages the Ziwell ZWA-G120 Multi-Mode AP, hereafter referred to as the “dev

28Advanced Settings These settings are only for more technically advanced users who have sufficient knowledge about wireless LAN. These settings shou

29can be useful in areas where many client devices are associating with the device, or in areas where the clients are far apart and can detect only t

30Block WLAN Relay (Isolate Client) The device supports isolation function. If you are building a public Wireless Network, enable this function can p

31Configuring Wireless Security This device provides complete wireless security function include WEP, 802.1x, WPA-TKIP, WPA2-AES and WPA2-Mixed in di

32refer to the following setting of the WEP encryption: z 64-bit WEP Encryption：64-bit WEP keys are as same as the encryption method of 40-bit WEP.

33 WPA Encryption Setting WPA feature provides a high level of assurance for end-users and administrators that their data will remain private and acc

34Configuring as WLAN Client Adapter This device can be configured as a wireless Ethernet adapter. In this mode, the device can connect to the other

35The alternative way to configure as following: Step 1. In “Wireless Site Survey” page, select one of the SSIDs you want to connect and then press

36Note ： If the available network requires authentication and data encryption, you need to setup the authentication and encryption before step1 and

37Ch 3. Configuring WDS Wireless Distribution System (WDS) uses wireless media to communicate with the other devices, like the Ethernet does. This fu

2Ch 1. ZWA-G120 Installation Packing List Before you start to install the device, make sure the package contains the following items： z ZWA-G120 Mul

38Star topology: Device Entries of WDS AP List Spanning Tree Protocol Required WDS1 The MAC Addresses of WDS2, WDS3, WDS4 and WDS5 No WDS2 The MA

39Mesh topology： LAN3LAN 4LAN 1LAN 2LAN 5WDS #5WDS #2WDS #3WDS #4WDS #1 Device Entries of WDS AP List Spanning Tree Protocol Required WDS1 The MAC

40EthernetWireless stationAP Repeater Description Entries of WDS AP List Spanning Tree Protocol Required Access Point The MAC Address of Repeater

41Ch 4. Advanced Configurations Configuring LAN to WAN Firewall Filtering function is used to block packets from LAN to WAN. The device supports thre

42MAC Filtering When you enable the MAC Filtering function, you can specify the MAC Addresses in current filter table. Once the source MAC Address of

43POP3 (Post Protocol) 110 NNTP (Network News Transport Protocol) 119 SNMP (Simple Network Management Protocol) 161 SNMP trap 162 SIP (Session In

44 Enable DMZ: Enable the “Enable DMZ”, and then click “Apply Changes” button to save the changes. DMZ Host IP Address: Input the IP Address of the c

45Static IP You can get the IP configuration data of Static-IP from your ISP. And you will need to fill the fields of IP address, subnet mask, gatewa

46DHCP Client (Dynamic IP) All IP configuration data besides DNS will obtain from the DHCP server when DHCP-Client WAN Access Type is selected. DN

47 User Name: The account provided by your ISP Password: The password for your account. Connect Type: “Continuous “ : connect to ISP permanently “Man

3Ch 2. First Time Configuration Before Start to Configure There are two ways to configure the device, one is through web-browser, and the other is th

48 IP Address: The Internet Protocol (IP) address of WAN interface provided by your ISP or MIS. The address will be your network identifier besides

49 2. Clone MAC address for Static IP WAN access type 3. Clone MAC address for PPPoE WAN access type

504. Clone MAC address for PPTP WAN access type 5. Physical LAN interface MAC address clone Configuring DHCP Server 1. To use the DHCP serve

51then the default gateway for all the DHCP client hosts will set to the IP address of device. Using CLI Menu Start a SSH(Secure Shell) client sessio

52 To disable the Web-Browser password protection just leave the “User Name” field to blank then click “Apply Changes” button. To change the passwor

53To upgrade firmware, just assign the file name with full path then click “Upload” button as the following page. Memory Limitation To make sure the

4types of operation mode. Router The wired Ethernet (WAN) port is used to connect with ADSL/Cable modem and the wireless NIC is used for your private

5also the wireless clients can survey and connect to the device. The following table shows the supporting combination of operation and wireless radio

6Examples of Configuration This example demonstrates how to set up a network with different device configurations. There are 2 DHCP servers (DEV1/DE

7Configure DEV1: 1. Connect the ADSL modem to Ethernet port of device using Ethernet cable. 2. Access the web server (http://192.168.2.254) of devi